Pc Programming - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

PC Programming

The UNIVERGE SV9100 has three different methods for programming. The first is via the handset, the

second is by PCPro and third by WebPro.

PCPro is a Microsoft Windows based application. It allows the technician/system administrator to

download a database from the system, make changes, and then upload.

The WebPro application is a web server running on the GCD-CP10 blade of the SV9100 system. No

special installation program is required. When programming the system, use Internet Explorer other web

browsers are not currently supported.

An overview of the three programming applications is shown below.

PC Programming Overview

As can be seen in PC Programming Overview, three connection types are available to PCPro/WebPro.

If using PCPro, a user can connect directly, remotely using a modem or via LAN. A connection with the

system is made via the Connection Dialog in the application. (Refer to PCPro Connection Dialog )

Modem (remote) connections are established via the internal GCD-CP10 modem. To access the

modem, dial a trunk that is directed to the modem access service code (DIL or DID) or dial an

extension that is redirected to the modem access service code. When connecting with a Modem, a

Dial Up Connection (PPP) must be set up in Windows Network Connections.

When uploading via a Dial Up connection, uploading card configuration (Hardware Upload) is not