Multiline Terminals; Single Line Telephones - NEC UNIVERGE SV9100 Features And Specifications

Operation
You must activate Room Monitor at the extension initiating the monitor and at the extension you want to monitor. You can
only listen to one extension at a time.

Multiline Terminals

To activate Room Monitor from an idle Multiline Terminal (initiating extension):
1. Press the Room Monitor key (Program 15-07 or SC 851: 39).
2. Dial the number of extension you want to monitor.
 You can place and answer other calls while Room Monitor is active.
To activate Room Monitor from an idle Multiline Terminal (extension to be monitored):
1. Press Room Monitor key (Program 15-07 or SC 851: 39).
2. Dial the number of the extension where you are located.

For example, if you are at extension 106, dial 106.
 You can place and answer other calls while Room Monitor is active.
To cancel Room Monitor (at either extension):
1. Press the Room Monitor key at both the initiating extension and the monitored extension.

Single Line Telephones

To activate Room Monitor (at the initiating extension):
1. Lift the handset at the telephone which is monitoring another telephone.
2. Dial 770.
3. Dial 2.
4. Dial number of extension number, which will be monitored.
 You cannot place or answer other calls while Room Monitor is active.
To activate Room Monitor (at the extension to be monitored):
1. Lift the handset at the telephone to be monitored.
2. Dial 770.
3. Dial 1.
4. Dial number of the extension number, which is monitoring the telephone.
5. Place the handset on the desk, placing the handset transmitter towards the room.
 You cannot place or answer other calls while Room Monitor is active.
To cancel Room Monitor (at either extension):
1. Hang up the handsets for both the monitored and the monitoring telephones.
1032