To Use Continued Dialing - NEC UNIVERGE SV9100 Features And Specifications

None
Related Features

Pulse to Tone Conversion
Guide to Feature Programming
Program
Program Name/Description
Number
Single Line Telephone Basic Data Setup –
15-03-03
Terminal Type
Enter 1 for this option to allow a single line port
to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF
tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
20-06-01 Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
20-13-13 Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
21-04-01 Toll Restriction Class for Extensions
Assign a Toll Restriction Class (1~15) to an
extension.
Toll Restriction Class – Maximum Number of
21-05-04
Digits Table Assignment
Select the table (defined in Program 21-06-03)
to be used to determine the maximum number
of digits allowed for outgoing calls.
Toll Restriction Table Data Setup –
21-06-03
Maximum Number of Digits Table
Assignment
Set the Maximum Number of digits dialed for
each table.
Operation

To use Continued Dialing:

1. Place an intercom or trunk call.
2. Continue dialing after the call connects.
 Toll Restriction and Class of Service programming may limit Continued Dialing.
Input Data
0 = Normal
1 = Special
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
0 = Off
1 = On
Day/Night Mode
1 ~ 9 (9 = Power Failure Mode)
Restriction Class 1 ~ 15
1 ~ 4 = Table
0 =Disable (None)
4 ~ 30
287
Default
0
Extension port
101 = Class 15
All other
extension port =
Class 1
COS 1 ~ 15 = 1
2
1, 2, 6 ~ 15 = 0
3 = 1
4 = 2
5 = 3
Tables 1 ~ 4 = 30