To Transfer A Call Into A Conference - NEC UNIVERGE SV9100 Features And Specifications

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

To Transfer a Call into a Conference:

While on a call, press Hold.

Dial the Transfer to Conference service code (default = 724).

If the telephone does not have the proper COS, a warning tone is sent. After the user hangs up, the

system automatically places a Callback to the extension.

The display shows the line Number, Number/Name and Extension Name/Number.

Dial the extension number or press a DSS key of a telephone in a Conference call.

If an error tone is heard, Barge-In is not enabled for the extension and the call cannot go through.

Retrieve the call by pressing the flashing line or Call Appearance (CAP) Key or hang up and the call

recalls the extension.

When the call is transferred into the Conference, an intrusion tone is heard by all parties in the

conference, depending on the entries in Program 20-13-17 and Program 80-01, and all display

multiline terminals show the joined party.

To cancel the transfer, press the flashing line or Call Appearance (CAP) Key to retrieve the call.