NEC UNIVERGE SV9100 Features And Specifications page 295

Program
Program Name/Description
Number
20-08-15 Class of Service Options (Outgoing Call
Service) – Block Outgoing Caller ID
Turn Off or On a user Class of Service from
automatically blocking outgoing Caller ID
information when a call is placed. If block is
enabled, the system automatically inserts the
Caller ID block code *67 (defined in Program
14-01-21) before the user dialed digits (this
requires Program 14-02-10 to be enabled). If
block is disabled, the system outdials the call
just as it was dialed by the user.
20-08-16 Class of Service Options (Outgoing Call
Service) – Display E911 Dialed Extension
Name and Number
Turn Off or On an extension ability to display
the name and number of the extension that
dialed 911.
20-08-17 Class of Service Options (Outgoing Call
Service) – ARS Override of Trunk Access
Map
Turn Off or On an extension user ability to
override the trunk access map programming for
outgoing calls.
20-08-22 Class of Service Options (Outgoing Call
Service) – Voice Over to busy Virtual
Extension
Enable/Disable an extension ability to voice
over to a busy virtual extension.
20-09-01 Class of Service Options (Incoming Call
Service) – Second Call for DID/DISA/DIL/
E&M Override
Turns Off or On the extension ability to receive
a second call from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the destination
extension must be busy for a second DNIS caller to
ring through. If the destination extension does not
have a trunk or CAP key available for the second
call and a previous call is ringing the extension but
has not yet been answered, the second caller hears
busy regardless of this program setting.
20-09-02 Class of Service Options (Incoming Call
Service) – Caller ID Display
Turn Off or On the Caller ID display at an
extension.
20-09-03 Class of Service Options (Incoming Call
Service) – Sub Address Identification
Define whether an extension displays the Caller
Sub-Address.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
295
Default
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
COS 1 ~ 15 = 0