NEC UNIVERGE SV9100 Features And Specifications page 751

Program
Program Name/Description
Number
22-02-01 Incoming Call Trunk Setup
Assign the incoming trunk type for each trunk.
44-02-01 Dial Analysis Table for ARS/F-Route Access
– Dial
Set the number of digits to be analyzed by the
system for ARS routing.
44-02-02 Dial Analysis Table for ARS/F-Route Access
– Service Type
Set the Service Type (0 ~ 3) for the Pre-
Transaction Table for selecting ARS/F-Route.
44-02-03 Dial Analysis Table for ARS/F-Route Access
– Additional Data
If a Service Type is selected in Program
44-02-02, set the additional data, if required, for
the Pre-Transaction Table for selecting ARS/
F-Route (24 digits max: 1 ~ 9, 0 *
enter a wild card/don't care digit, press Line
Key 1 to enter an @.
ARS/F-Route Table – Trunk Group Number
44-05-01
Select the trunk group number to be used for
the outgoing ARS call.
ARS/F-Route Table – Maximum Digit
44-05-09
Input the maximum number of digits to send
when using the F-Route.
H.323 Trunk Basic Information Setup –
84-01-02
Number of G.711 audio frames
Define the number of G.711 Audio Frames.
H.323 Trunk Basic Information Setup – G.711
84-01-03
VAD mode
Enable/Disable the G.711 VAD mode for H.323.
H.323 Trunk Basic Information Setup – G.711
84-01-04
Type
Define the G.711 type for H.323.
Input Data
Trunks 1 ~ 400
0 = Normal
1 = VRS (second
dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode
Switching
Maximum of eight digits (Use
line key 1 for a 'Don't Care' digit,
@).
0 = No Setting (None)
1 = Extension Call (Own)
2 = ARS/F-Route Table
(F-Route)
3 = Dial Extension Analyze
Table (Option)
1 = Delete Digit = 0 ~ 255
(255: Delete All Digits)
2 = 0 ~ 500
(0 = No Setting)
3 = Dial Extension Analyze
#
, @). To
Table Number = 0 ~ 4
(0 = No Setting)
0 ~ 100, 255
0 = No Setting
255 = Extension Call
0 ~ 24
1 ~ 4
0 = Disable
1 = Enable
0 = A-law
1 = -law
751
Default
0
No Setting
0
0
0
0
3
0
1