Emergency Call Record; Cancel The Remote Inspection; Answering The Remote Inspection Ring; Not Answering The Remote Inspection Ring - NEC UNIVERGE SV9100 Features And Specifications

3. Dial 1 to set.
4. Dial the Remote Inspection extension number, 200.
5. Dial the Ring start time, 1200.
6. Dial ring length time, 03.
7. Dial the Speed dial bin number to be used, 1999.
8. Dial the emergency call destination number xxx-xxx and press Hold.
9. When answered, dial the VRS message number 001.
10. After the beep, record the message and press
11. When the emergency call destination answers, dial VRS message2
12. After confirmation tone, record message.
13. Press Speaker to hang up.

Cancel the Remote Inspection:

1. Press Speaker and 619.
2. Dial the Remote Inspection number (1~6).
3. Dial 0 to cancel.

Answering the Remote Inspection Ring:

At 12:00 o'clock (noon) extension 200 starts ringing.
1.
2. The first VRS message plays when answered.
3. When message finishes, the call disconnects.

Not Answering the Remote Inspection Ring

At 12:00 o'clock extension 200 starts ringing.
1.
2. Ringing continues for over three minutes.
3. The ringing on extension 200 ends and a call is automatically placed to Speed dial bin 1999.
4. When answered, VRS sends a second message.
5. After finishing second VRS message finishes, called destination can automatically monitor
extension 200.
6. Press * to enable two-way conversation.

Emergency Call Record

<Program Example>
Program 10-20-01 (Index 5): 10000
Program 14-01-06: 1
Program 35-01-01: 3 (LAN)
Program 35-02-22: 1
Program 35-02-23: 1
 In above setting, make sensor mode or remote inspection emergency call, record to SMDR.
.
#
1059