NEC UNIVERGE SV9100 Features And Specifications page 191

Program
Program Name/Description
Number
20-13-13 Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
20-13-23 Class of Service Options (Supplementary
Service) – Display the Reason for Transfer
Select whether or not an extension should
display the reason a call is being transferred to
their extension (Call Forward Busy, Call
Forward No Answer, DND).
System Options for Outgoing Calls –
21-01-15
Outgoing Disable on Incoming Line (Toll
Restriction)
Enable/Disable the Outgoing Disable on
Incoming Line feature.
System Options for Outgoing Calls –
21-01-16
Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line
feature, if dial tone is not detected after the
extension answers an incoming line, the system
determines the call is unable to complete and
releases the DTMF receiver.
System Options for Outgoing Calls –
21-01-17
Restriction Digit in Outgoing Disable on
Incoming Line
With the Outgoing Disable on Incoming Line
feature, determine the number of digits to be
dialed before the call should be disconnected.
System Options for Incoming Calls –
22-01-01
Incoming Call Priority
Determine if Intercom calls or trunk calls have
answer priority when both are ringing
simultaneously.
System Options for Incoming Calls –
22-01-02
Incoming Call Ring No Answer Alarm
Enable/Disable the Incoming Call RNA Alarm. If
enabled, the ring cadence changes for a call
that rings longer than the interval set in
Program 22-01-03.
System Options for Incoming Calls – Ring
22-01-03
No Answer Alarm Time
Set the Ring No Answer Alarm time. If a trunk
rings a multiline terminal longer than this time,
the system changes the ring cadence.
Input Data
0 = Off
1 = On
0 = Off
1 = On
0 = Disable (Off)
1 = Enable (On)
0 ~ 64800 seconds
Digits 1 ~ 9
0 = Intercom call priority
1 = Trunk call priority
0 = Disable
1 = Enable
0 ~ 64800 seconds
191
Default
COS 1 ~ 15 = 1
COS 1 ~ 15 = 0
0
20
4
1
0
60