NEC UNIVERGE SV9100 Features And Specifications page 681

Program
Program Name/Description
Number
Operator Extension – Operator's Extension
20-17-01
Number
Define the extension numbers used by
operators.
Service Tone Timers – Extension Dial Tone
20-18-01
Time
After getting Intercom dial tone, a multiline
terminal user has this time to dial the first digit
of the Intercom call.
System Options for Outgoing Calls –
21-01-02
Intercom Interdigit Time
When placing Intercom calls, an extension user
must dial each digit during this time.
Incoming Ring Tone – Frequency 1
82-01-01
(01)
Customize the Intercom ring tone.
Incoming Ring Tone – Frequency 2
82-01-02
Customize the Intercom ring tone.
Incoming Ring Tone – Modulation
82-01-03
Customize the Intercom Ring Tone modulation
if desired.
Handsfree Answerback/Forced Intercom Ringing:
Program
Program Name/Description
Number
11-11-15 Service Code Setup (for Setup/Entry
Operation) – Enable Handsfree Incoming
Intercom Calls
Customize the enable handsfree incoming
intercom calls used for registration and setup.
11-11-16 Service Code Setup (for Setup/Entry
Operation) – Force Ringing of Incoming
Intercom Calls
Customize the force ringing of incoming
intercom calls used for registration and setup.
Input Data
Maximum of eight digits
0 ~ 64800 seconds
0 ~ 64800 seconds
1 = 520Hz
2 = 540Hz
3 = 660Hz
4 = 760Hz
5 = 1100Hz
6 = 1400Hz
7 = 2000Hz
1 = 520Hz
2 = 540Hz
3 = 660Hz
4 = 760Hz
5 = 1100Hz
6 = 1400Hz
7 = 2000Hz
0 = No Modulation
1 = 8Hz Modulation
2 = 16Hz Modulation
3 = Envelope
Input Data
MLT
*
#
0 ~ 9, , Maximum of eight
digits
MLT
*
#
0 ~ 9, , Maximum of eight
digits
681
Default
101
30
10
Refer to
Default
Incoming
Ringing Tone
Refer to Default
Incoming
Ringing Tone
2
Default
821
823