NEC UNIVERGE SV9100 Features And Specifications page 695

Hide thumbs Also See for UNIVERGE SV9100:

Table of Contents

Program Name/Description

DT800/DT700 Server Information Setup –

Normal mode:

When the phone boots up, it reports the ext.

assigned in the phone or chooses the next

available extension in the system. No

password is required.

If set to Auto, the SIP user name and password

must be entered in the actual IP phone. These

settings must match 84-22/15-05-27, for the

phone to come on-line.

Manual mode:

When the phone boots up it prompts a user to

enter a user ID and password before logging in.

It checks the user ID/password against 84-22/

15-05-27. If there is no match, the phone does

not come on-line.

License Configuration for Each Package –

License Code

Assign VoIP Resource Licenses (5103) to

GCD-CP10 slot (1).

If applying more than 255 licenses to a slot, the

licenses must be applied across multiple

For example, assigning 256 VoIP resource

licenses (5103) to the CPU slot could be

assigned using different methods as long as the

total for the CPU slot is 256.

1. Index 1 has 128 of feature code 5103 and

index 2 also has 128 of feature code 5103 for a

total of 256.

2. Index 1 has 255 of feature code 5103 and

index 2 has 1 of feature code 5103 for a total of

IP Telephone Terminal Basic Data Setup –

Set the registered IP Phone Codec type –

Reference Program 84-24 DT800/DT700

Codec Basic Information.

1 ~ 255 Resource Licenses