Non-Mcu Mode - NEC UNIVERGE SV9100 Features And Specifications

Program
Program Name/Description
Number
IPL Basic Setup – Maximum MCU Group
84-27-22
Number (Mode 1)
Used to reserve VoIP DSP resources for mode
1 video conferences. When a DSP resource is
reserved it is not available for SIP voice calls.
VoIP DSP resources are shared between video
and voice calls. The system will always keep 64
resources for voice calls. When changing this
program if resources are exceeded the system
will provide an error message and will not allow
the setting to be changed.
When changing this program, all DSP
resources are reset when idle. In progress calls are
not affected, but until all DSP resources go idle this
change will not take affect.
IPL Basic Setup – Maximum MCU Group
84-27-23
Number (Mode 2)
Used to reserve VoIP DSP resources for mode
2 video conferences. When a DSP resource is
reserved it is not available for SIP voice calls.
VoIP DSP resources are shared between video
and voice calls. The system will always keep 64
resources for voice calls. When changing this
program if resources are exceeded the system
will provide an error message and will not allow
the setting to be changed.
When changing this program, all DSP
resources are reset when idle. In progress calls are
not affected, but until all DSP resources go idle this
change will not take affect.

Non-MCU Mode:

Program
Program Name/Description
Number
ETU Setup – Number of Voice Channels
10-03-03
Read only program showing number of VoIP
resources available for voice calls.
This information can also be viewed by
pressing Feature+4 on an idle display terminal.
IP Telephone Terminal Basic Data Setup –
15-05-43
Video Mode
Enable/Disable Video Mode for Standard SIP
terminals.
Input Data
0 = No MCU video channels
reserved
1 = 4 MCU video Mode 1
channels reserved
0 = No MCU video channels
reserved
1 = 4 MCU video Mode 1
channels reserved
Input Data
0 = Disable
1 = Enable
1082
Default
0
0
Default
0