Callback To Cell Phone - NEC UNIVERGE SV9100 Features And Specifications

Callback to Cell Phone:

Program
Program Name/Description
Number
Speed Dialing Number and Name – Speed
13-04-01
Dialing Data
Enter the Common and Group Speed Dialing
numbers and names which are to be used for
Trunk-to-Trunk Forwarding.
Speed Dialing Number and Name – Transfer
13-04-03
Mode
When the incoming caller ID matches the
number programmed in the speed dial bin, this
setting determines the destination of the call.
Speed Dialing Number and Name – Transfer
13-04-04
Destination Number
When the incoming caller ID matches the
number programmed in the speed dial bin, this
setting determines the destination of the call.
Set up the transfer destination number or the
IRG number.
Basic Trunk Data Setup – Flexible Ringing
14-01-30
by Caller ID
Enable/Disable Flexible ringing on each Trunk
port base.
Mobile Extension Setup – Mobile Extension
15-22-01
Target Setup
For each Mobile Extension number, select the
Abbreviated Dial bin number to be associated
with it.
Mobile Extension Setup – Trunk Access
15-22-03
Code
Select whether the Normal or Individual Trunk
access is used when making the call to the
mobile number.
Mobile Extension Setup – Call Back
15-22-04
Select whether or not the system will try to call
back a mobile extension user.
System Options – Mobile Extension
20-01-16
Callback Duration Time
Determines the amount of time the system will
call back a mobile extension user before
abandoning the call.
Input Data
(Maximum of 24 digits)
#
1~9, 0, *,
Pause (Press line key 1)
Recall/Flash (Press line key 2)
@ = Code to wait for answer
supervision in ISDN (Press line
key 3)
0 = Not Used
1 = Internal Dial
2 = Incoming Ring Group (IRG)
If Transfer mode is (Refer to
Program 13-04-03):
1 = Internal Dial Mode
#
1 ~ 9, 0, *, , P, R, @
(Maximum 24 Characters)
2 = Incoming Ring Group
0 ~ 100 (IRG Number)
P = Pause
R = Recall
@ = Additional Digits when
using ISDN functionality
0 = Disable
1 = Enable
0 ~ 9999
(0 = No setting
1 ~ 9999 = target of mobile
extension)
0 = Use normal trunk access
code (Program 11-09-01)
1 = Use individual trunk access
code (Program 11-09-02)
0 = Don't call back
1 = Call back
0 ~ 64800 seconds
889
Default
No Setting
0
No Setting
1
0
0
0
15