NEC UNIVERGE SV9100 Features And Specifications page 199

Program
Program Name/Description
Number
Analog Trunk Data Setup – Loop Start/
14-02-14
Ground Start
Select Loop start or Ground start for the trunk.
Trunk Group – Trunk Group Number
14-05-01
Assign trunks to trunk groups then go to
Program 14-06-01 below to set up Trunk Group
Routing.
Trunk Group Routing – Priority Order
14-06-01
Number
Set the priority order number 1 ~ 4.
14-07-01 Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the
access options for trunks. Ring Group
programming overrides Access Map
programming.
Multiline Telephone Basic Data Setup –
15-02-01
Display Language Selection
Select the language to be displayed on a
multiline terminal display.
Input Data
0 = Disable
1 = Enable
Trunk Port 1 ~ 400 =
Priority 1 ~ 400
0 = Not Set
001 ~ 100 = Trunk group No.
101 ~ 150 = 100 + Networking
System No.
1001 ~ 1100 = 1000 + Route
Table No.
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on
Hold
4 = Outgoing access and access
when trunk on Hold
5 = Incoming access and access
when trunk on Hold
6 = Incoming and Outgoing
access
7 = Incoming access, outgoing
access and access when trunk
on Hold
Trunk Access Maps: 1 ~ 400
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American
Spanish
13 = Romanian
14 = Polish
199
Default
0
Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities
equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.
Route 1, Order
Number 1 = 1
(Trunk Group 1)
Order Numbers
2, 3, 4 = 0 (Not
Specified)
All Other Routes
(2 ~ 100) and
Order Numbers
(1 ~ 4) = 0 (Not
Specified).
Access Maps
1 ~ 400 = Trunk
Ports 1 ~ 400
assigned with
option 7 access
(incoming and
outgoing access
and access
when trunk is on
Hold).
1