NEC UNIVERGE SV9100 Features And Specifications page 366

Program
Program Name/Description
Number
22-02-01 Incoming Call Trunk Setup
For each Night Service Mode, enter service
type 3 when the trunk should be a DID trunk.
22-04-01 Incoming Extension Ring Group
Assignment
Assign extensions to Ring Groups. Calls ring
the extensions according to programming in
Program 22-06.
DID Basic Data Setup – Expected Number of
22-09-01
Digits
For each DID Translation Table (1 ~ 20), enter
the number of digits the table expects to receive
from the CO (eight maximum). For example, for
a table used with 3-digit DID service, enter 3.
DID Basic Data Setup – Received Vacant
22-09-02
Number Operation
Enable/Disable Vacant Number Intercept.
22-10-01 DID Translation Table Setup
Assign the start and end range of DID
Translation Table entries (1 ~ 4000) to each
DID Translation Table (1 ~ 20).
DID Translation Number Conversion –
22-11-01
Received Number
For each DID Translation Table entry
(1 ~ 4000), specify the digits received by the
system.
Input Data
Incoming Type for Day/Night
Mode (1 ~ 8):
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
Maximum eight digits.
1 ~ 8
0 = Disconnect
1 = Transfer
0 ~ 4000
(0 = No Setting)
Maximum of eight digits
366
Default
0
Extensions 101
~ 108 (first eight
ports) ring for
incoming Ring
Group 1 calls.
No other
extensions ring
for incoming
Ring Group 1
calls.
4
0
1st:
1 Start – 1,
End – 100
2 Start – 101,
End – 200
3 Start – 201,
End – 300
4 Start – 301,
End – 400
5 ~ 20 Start – 0,
End – 0
2nd:
1 ~ 20 Start – 0,
End – 0
No Setting