Set Lldp Frame Transmission Interval For High Speed Transmission Period; Set Time From Lldp Frame Transmission Stop Until Re-Initialization - Yamaha L2 Command Reference Manual

no set timer msg-tx-interval
[Parameter]
tx_interval
[Initial value]
set timer msg-tx-interval 30
[Input mode]
LLDP agent mode
[Description]
Sets LLDP frame transmission interval.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Set 60 seconds as the LLDP frame transmission interval on LAN port #1.
SWR2311P(config)#lldp run
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#lldp-agent
SWR2311P(config-lldp)#set timer msg-tx-interval 60

4.19.13 Set LLDP frame transmission interval for high speed transmission period

[Syntax]
set timer msg-fast-tx fast_tx
no set timer msg-fast-tx
[Parameter]
fast_tx
[Initial value]
set timer msg-fast-tx 1
[Input mode]
LLDP agent mode
[Description]
Sets the LLDP frame transmission interval during the high speed transmission period.
If this command is executed with the "no" syntax, the setting returns to the default.
The high speed transmission period is the period immediately after a port's connected device was newly found, and LLDP
frames are transmitted according to the following commands for making high speed transmission period settings.
• set timerx msg-fast-tx fast_tx : Sets the transmission interval (seconds) during the high speed transmission period.
• set tx-fast-init value : Sets the number of LLDP frames transmitted during the high speed transmission period.
[Example]
Set 2 seconds as the LLDP frame transmission interval during the high speed transmission period on LAN port #1.
SWR2311P(config)#lldp run
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#lldp-agent
SWR2311P(config-lldp)#set timer msg-fast-tx 2

4.19.14 Set time from LLDP frame transmission stop until re-initialization

[Syntax]
set timer reinit-delay reinit_delay
no set timer reinit-delay
[Parameter]
reinit_delay
: <5-3600>
LLDP frame transmission interval (seconds)
: <1-3600>
LLDP frame transmission interval for high speed transmission period (seconds)
: <1-10>
Command Reference | Maintenance and operation functions | 87