Set Basic Management Tlvs; Set Ieee-802.1 Tlv - Yamaha L2 Command Reference Manual

SWR2311P(config)#lldp run
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#lldp-agent
SWR2311P(config-lldp)#set management-address mac-address

4.19.8 Set basic management TLVs

[Syntax]
tlv-select basic-mgmt
no tlv-select basic-mgmt
[Initial value]
none
[Input mode]
LLDP agent mode
[Description]
Adds basic management TLVs to transmitted frames.
If this command is executed with the "no" syntax, exclude basic management TLVs from transmitted frames.
This command adds the following TLVs to LLDP frames.
<Basic management TLV>
(1) Port Description TLV : Description of port
(2) System Name TLV : Name of system
(3) System Description TLV : Description of system
(4) System Capabilities TLV : System capabilities
(5) Management Address TLV : Management address of port (MAC address or IP address)
[Example]
Add basic management TLVs to the LLDP frames that are transmitted on LAN port #1.
SWR2311P(config)#lldp run
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#lldp-agent
SWR2311P(config-lldp)#tlv-select basic-mgmt

4.19.9 Set IEEE-802.1 TLV

[Syntax]
tlv-select ieee-8021-org-specific
no tlv-select ieee-8021-org-specific
[Initial value]
none
[Input mode]
LLDP agent mode
[Description]
Adds IEEE-802.1 TLVs to transmitted frames.
If this command is executed with the "no" syntax, exclude IEEE-802.1 TLVs from transmitted frames.
This command adds the following TLVs to LLDP frames.
<IEEE-802.1 TLV>
(1) Port VLAN ID : ID of port VLAN
(2) Port and Protocol VLAN ID : ID of protocool VLAN
(3) Protocol Identity : List of supported protocols
(4) Link Aggregation : Link aggregation information
(5) VLAN Name : Name of port VLAN
[Example]
Add IEEE-802.1 TLVs to the LLDP frames that are transmitted on LAN port #1.
SWR2311P(config)#lldp run
SWR2311P(config)#interface port1.1
Command Reference | Maintenance and operation functions | 85