5.5.2 Show error detection function information
[Syntax]
show errdisable
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows information for the error detection function.
The following items are shown.
•
Whether automatic recovery from the errdisable state is enabled or disabled
•
The interface that is in the errdisable state, and the function that detected the error
[Example]
Show information for the error detection function.
SWR2311P>show errdisable
function
-----------------------------------------------
BPDU guard
Loop detect
Port-security
port
----------------------------
port1.1
port1.7
5.6 PoE
5.6.1 Set PoE power supply function (system)
[Syntax]
power-inline switch
no power-inline
[Parameter]
switch
[Initial value]
power-inline enable
[Input mode]
global configuration mode
[Description]
Set the system-wide PoE power supply function as enabled or disabled.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
Even if the system-wide PoE power supply function is enabled, power supply will be disabled for each port if the power supply
function is disabled for individual ports.
[Example]
Enable the system-wide PoE power supply function.
auto recovery
disable
enable
disable
reason
BPDU guard
Loop detect
:
System-wide PoE power supply function settings
Setting value
enable
disable
interval
300
Description
Enables the system-wide PoE power supply
function
Disables the system-wide PoE power supply
function
Command Reference | Interface control | 153