Set Mru - Yamaha L2 Command Reference Manual

112 | Command Reference | Interface control
[Parameter]
type
[Initial value]
speed-duplex auto
[Input mode]
interface mode
[Description]
Sets the speed and duplex mode.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
When this command is used to change the settings, link-down temporarily occurs for the corresponding interface.
This command can be specified only for LAN/SFP port.
type10000-full cannot be set for the LAN port.
The only type that can be specified for combo port is auto or 1000-full.
[Example]
Set the speed and duplex mode for LAN port #1 to 100Mbps/Full.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#speed-duplex 100-full

5.1.4 Set MRU

[Syntax]
mru mru
no mru
[Parameter]
mru
[Initial value]
mru 1522
[Input mode]
interface mode
[Description]
Specifies the maximum frame size that can be received.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
This command can be specified only for LAN/SFP port.
[Example]
Set the LAN port #1 mru to 9000 bytes.
: Speed and duplex mode types
Speed and duplex mode types
auto
10000-full
1000-full
100-full
100-half
10-full
10-half
: <64-10240>
Maximum frame size that can be received (the specified value must be an even number)
Description
Auto negotiation
10Gbps/Full
1000Mbps/Full
100Mbps/Full
100Mbps/Half
10Mbps/Full
10Mbps/Half