Clear Counters Of The Rmon Ethernet Statistical Information Group; Telnet Server; Start Telnet Server And Change Listening Port Number - Yamaha L2 Command Reference Manual

[Description]
Shows the settings and status of the RMON alarm group.
The following items are shown.
• Index
• Alarm status
• MIB object to be monitored
• Sampling interval
• Sampling type
• Measured value
• Upper threshold value
• Event for upper threshold value
• Lower threshold value
• Event for lower threshold value
• Startup alarm
• Owner name
[Example]
SWR2311P>show rmon alarm
alarm Index = 1
alarm status = VALID
alarm Interval = 15
alarm Type is Absolute
alarm Value
alarm Rising Threshold = 10
alarm Rising Event = 1
alarm Falling Threshold = 7
alarm Falling Event = 1
alarm Startup Alarm = 3
alarm Owner is RMON_SNMP

4.11.11 Clear counters of the RMON Ethernet statistical information group

[Syntax]
rmon clear counters
[Input mode]
interface mode
[Description]
Clears the counters of the RMON Ethernet statistical information group for the applicable interface.
[Example]
Clear the counters of the RMON Ethernet statistical information group for port1.1.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#rmon clear counters

4.12 Telnet server

4.12.1 Start Telnet server and change listening port number

[Syntax]
telnet-server enable [port]
telnet-server disable
no telnet-server
[Keyword]
enable
disable
= 0
: Telnet server is enabled
: Telnet server is disable
Command Reference | Maintenance and operation functions | 65