Clear Boot Information; Set Sd Card Boot; Show The Sd Card Boot Setting Information - Yamaha L2 Command Reference Manual

36 | Command Reference | Maintenance and operation functions
SWR2311P>show boot list
No. Date
--- ---------- -------- -------------------------------------------------
0 2018/03/15 09:50:29 Restart by reload command
1 2018/03/14 20:24:40 Power-on boot
--- ---------- -------- -------------------------------------------------

4.4.2 Clear boot information

[Syntax]
clear boot list
[Input mode]
priviledged EXEC mode
[Description]
Clears the boot information history.
[Example]
Clear the boot information.
SWR2311P#clear boot list

4.4.3 Set SD card boot

[Syntax]
boot prioritize sd switch
[Parameter]
switch
[Initial value]
boot prioritize sd enable
[Input mode]
priviledged EXEC mode
[Description]
Enable or disable the SD card boot function of the firmware.
After this command is executed, the system will restart.
Since this setting is common to the system, it cannot be specified individually for each startup configuration (startup-config #0
~ strtup-config #4).
By default, SD card boot is enabled.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
The SD card boot function enabled/disabled status can be viewed by using the show boot prioritize sd command.
[Example]
Enable the SD card boot function of the firmware.
SWR2311P#boot prioritize sd enable
reboot system? (y/n): y

4.4.4 Show the SD card boot setting information

[Syntax]
show boot prioritize sd
[Input mode]
unprivileged EXEC mode、priviledged EXEC mode
Time Info
: Enable or disable SD card boot
Setting
enable
disable
Description
Enable SD card boot
Disable SD card boot