Show Eee Capabilities; Show Eee Status - Yamaha L2 Command Reference Manual

114 | Command Reference | Interface control
When this command is used to change the settings, link-down temporarily occurs for the corresponding interface.
[Example]
Enable EEE for LAN port #1.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#eee enable

5.1.7 Show EEE capabilities

[Syntax]
show eee capabilities interface ifname
[Parameter]
ifname
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows whether the specified interface supports EEE.
The following items are shown.
interface
EEE(efficient-ethernet)
Link Partner
[Note]
If another unit is not connected, the display indicates that EEE is not supported.
[Example]
Show EEE capabilities for LAN port #1.
・If the other unit supports EEE
SWR2311P#show eee capabilities interface port1.1
interface:port1.1
EEE(efficient-ethernet):
Link Partner
・If the other unit does not support EEE
SWR2311P#show eee capabilities interface port1.1
interface:port1.1
EEE(efficient-ethernet):
Link Partner

5.1.8 Show EEE status

[Syntax]
show eee status interface ifname
[Parameter]
ifname
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the EEE status of the specified interface.
The following items are shown.
: LAN port interface name
Interface to show
Item
yes (1000-T, 100-TX)
: yes (1000-T, 100-TX)
yes (1000-T, 100-TX)
: not enabled
: LAN port interface name
Interface to show
Description
Interface name
Whether the unit supports EEE
Whether the other unit supports EEE