Chapter 6: Layer 2 Functions; Fdb (Forwarding Data Base); Set Mac Address Acquisition Function; Set Dynamic Entry Ageing Time - Yamaha L2 Command Reference Manual

Chapter
6
Layer 2 functions

6.1 FDB (Forwarding Data Base)

6.1.1 Set MAC address acquisition function

[Syntax]
mac-address-table learning enable
mac-address-table learning disable
no mac-address-table learning
[Keyword]
enable
disable
[Initial value]
mac-address-table learning enable
[Input mode]
global configuration mode
[Description]
Enables/disables the MAC address learning function.
If this is executed with the "no"syntax, the MAC address acquisition function is enabled.
[Note]
If the MAC address acquisition function is disabled, a dynamic entry is not registered in the MAC address table even if a frame
is received.
[Example]
Enable the MAC address acquisition function.
SWR2311P(config)#mac-address-table learning enable

6.1.2 Set dynamic entry ageing time

[Syntax]
mac-address-table ageing-time time
no mac-address-table ageing-time
[Parameter]
time
[Initial value]
mac-address-table ageing-time 300
[Input mode]
global configuration mode
[Description]
Sets the dynamic entry ageing time.
If this command is executed with the "no" syntax, the setting returns to the default.
[Note]
In some cases, there might be a discrepancy between the time specified by this command and the time until the dynamic entry is
actually deleted from the MAC address table.
[Example]
Set the dynamic entry ageing time to 600 seconds.
: Enables MAC address learning function
: Disables MAC address learning function
: <10-600>
Ageing time (seconds)
Command Reference | Layer 2 functions | 157