Show Lacp Logical Interface Status - Yamaha L2 Command Reference Manual

126 | Command Reference | Interface control

5.2.4 Show LACP logical interface status

[Syntax]
show etherchannel [ifname]
[Parameter]
ifname
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
If ifname is omitted, shows the status of the LACP logical interface.
The following items are shown for each LACP logical interface that exists.
• LACP logical interface name
• Load balance function rules
• Interface name of associated LAN/SFP port
For details on the load balance function rules, refer to the type parameter of the port-channel load-balance command.
If ifname is specified, shows the status of the LAN/SFP port that make up the LACP logical interface.
The following items are shown.
Etherchannel portN.N
Physical admin key
Receive machine state
Periodic Transmission machine state
Mux machine state
Selection
Information
Aggregator ID
: Interface name of the LAN/SFP port
Interfaces that make up the LACP logical interface
Item Description
LAN/SFP port name
Key that identifies physical characteristics (created from
bandwidth, duplex, mru, and VLAN structure)
Status of the LACP protocol Receive machine transition
variable
• "Invalid"
• "Initialize"
• "Port disabled"
• "LACP disabled"
• "Expired"
• "Defaulted"
• "Current"
Status of the LACP protocol Periodic Transmission transition
variable
• "Invalid"
• "No periodic"
• "Fast periodic" (transmitted at one-second intervals)
• "Slow periodic" (transmitted at 30 second intervals)
• "Periodic"
Status of the LACP protocol Receive machine transition
variable
• "Detached"
• "Waiting"
• "Attached"
• "Collecting/Distributing"
Usage status
• "Selected"
• "Unselectedic"
• "Standby"
Refer to the table below (Actor is self, Partner is other party)
Distinguishing ID on LACP