Delete The File For Customizing The Web Authentication Screen; Port Security; Set Port Security Function - Yamaha L2 Command Reference Manual

150 | Command Reference | Interface control

5.3.33 Delete the file for customizing the Web authentication screen

[Syntax]
erase auth-web custom-file all config_num
erase auth-web custom-file filename config_num
[Keyword]
all
[Parameter]
filename
config_num
[Input mode]
priviledged EXEC mode
[Description]
Deletes the file for customizing the Web authentication screen.
[Example]
Deletes logo.png from startup configuration #0.
SWR2311P#erase auth-web startup-config logo.png 0

5.4 Port security

5.4.1 Set port security function

[Syntax]
port-security enable
port-security disable
no port-security
[Keyword]
enable
disable
[Initial value]
port-security disable
[Input mode]
interface mode
[Description]
Enables the port security function for the applicable interface.
If this is executed with the "no" syntax, or disable is specified, port security will be disabled for the applicable interface.
[Note]
This command can be specified only for LAN/SFP port.
Any unregistered terminals will be discarded at the time when the port security function is enabled.
[Example]
Enable port security for LAN port #1.
: Deletes the file for customizing all Web authentication screens
: Single-byte alphanumeric characters and single-byte symbols
Filename of the file for customizing the Web authentication screen
: Number of config
Setting value
0-4
sd
: Enables port security function
: Disables port security function
Description
Number of the start-up config
SD card