Show Port Error Led Status; Backup System Information - Yamaha L2 Command Reference Manual

[Example]
Show the LED mode setting and status.
SWR2311P>show led-mode
default mode : off
current mode : link-act

4.23.8 Show port error LED status

[Syntax]
show error port-led
[Input mode]
unprivileged EXEC mode, priviledged EXEC mode
[Description]
Shows the ID of ports that are generating an error, and the following error causes.
loop-detected (blocking)
loop-detected (shutdown)
sfp rx-power error (low)
sfp rx-power error (high)
poe error (port limit)
poe error (system limit)
poe error (PD error)
[Example]
Show the port error status.
SWR2311P>show error port-led
ID
-----------------------------------------
port1.3
port1.10

4.23.9 Backup system information

[Syntax]
backup system
[Input mode]
priviledged EXEC mode
[Description]
Copy the following settings from the unit to the SD card.
• Startup configurations #0 - #4 and information that pertains to them
• startup-config select command values
• boot prioritize sd command values
If the SD card's "\swr2311p\firmware" folder contains "swr2311p.bin", copy it to the backup folder.
This can be executed only if the SD card is mounted.
[Note]
Do not edit or delete the files that are backed up to the SD card.
[Example]
Execute a system information backup.
SWR2311P#backup system
Succeeded to backup system files and firmware file.
Item
error
poe error (PD error)
loop-detected (blocking)
Command Reference | Maintenance and operation functions | 109
Description
Detected a loop, and are currently blocking
Detected a loop, and are currently shutdown
SFP optical reception level is below the normal range
SFP optical reception level is above the normal range
Power supply stopped because of PoE port limit
Power supply stopped because of PoE system limit
Power supply stopped because PD error detected