Clear Dynamic Entry; Set Static Entry - Yamaha L2 Command Reference Manual

158 | Command Reference | Layer 2 functions
SWR2311P(config)#mac-address-table ageing-time 600

6.1.3 Clear dynamic entry

[Syntax]
clear mac-address-table dynamic
clear mac-address-table dynamic adress mac-addr
clear mac-address-table dynamic vlan vlan-id
clear mac-address-table dynamic interface ifname [instance inst]
[Keyword]
address
vlan
interface
instance
[Parameter]
mac-addr
ifname
vlan-id
inst
[Input mode]
priviledged EXEC mode
[Description]
Deletes a dynamic entry from the MAC address table.
If a keyword is specified, only the entries that match the applicable conditions are deleted.
If no keyword is specified, all dynamic entries are deleted.
[Example]
Delete the dynamic entry whose MAC address is 00a0.de11.2233.
SWR2311P#clear mac-address-table dynamic address 00a0.de11.2233

6.1.4 Set static entry

[Syntax]
mac-address-table static mac-addr action ifname [vlan vlan-id]
no mac-address-table static mac-addr action ifname [vlan vlan-id]
[Keyword]
vlan
[Parameter]
mac-addr
action
: Specifies the MAC address
: Specifies the VLAN ID
: Specifies the interface
: Specifies the MST instance
: hhhh.hhhh.hhhh (h is hexadecimal)
Applicable MAC address
: Name of LAN/SFP port or logical interface
Applicable interface
: <1-4094>
Applicable VLAN ID
: <1-63>
Applicable MST instance ID
: Specifies the VLAN ID
: hhhh.hhhh.hhhh (h is hexadecimal)
Applicable MAC address
: Action applied to frames addressed to mac-addr
Setting value
forward
Description
Forward