182 | Command Reference | Layer 2 functions
6.3.18 Set priority of MST instance
[Syntax]
instance instance-id priority priority
no instance instance-id priority
[Parameter]
instance-id
priority
[Initial value]
instance instance-id priority 32768
[Input mode]
MST mode
[Description]
Sets the priority of the MST instance.
Lower numeric values indicate a higher priority, increasing the probability that this MST instance will become the root bridge.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Set MST instance #2 to a priority of 4096.
SWR2311P(config)#spanning-tree mst configuration
SWR2311P(config-mst)#instance 2
SWR2311P(config-mst)#instance 2 priority 4096
6.3.19 Set MST region name
[Syntax]
region region-name
no region
[Parameter]
region-name
[Initial value]
region Default
[Input mode]
MST mode
[Description]
Sets the MST region name.
If this command is executed with the "no" syntax, the setting returns to the default.
[Example]
Set the MST region name to "Test1".
SWR2311P(config)#spanning-tree mst configuration
SWR2311P(config-mst)#region Test1
6.3.20 Set revision number of MST region
[Syntax]
revision revision
[Parameter]
revision
:
<1-15>
Instance ID
:
<0-61440> (multiple of 4096)
Priority value
:
Single-byte alphanumeric characters and single-byte symbols(32characters or less)
Region name
:
<0-65535>