Set Dynamic Vlan; Set The Guest Vlan - Yamaha L2 Command Reference Manual

[Example]
Enable re-authenticatio of LAN port #1.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#auth reauthentication

5.3.12 Set dynamic VLAN

[Syntax]
auth dynamic-vlan-creation
no auth dynamic-vlan-creation
[Initial value]
no auth dynamic-vlan-creation
[Input mode]
interface mode
[Description]
Sets dynamic VLAN for the applicable interface.
If this is executed with the "no" syntax, the dynamic VLAN is disabled.
For interfaces on which dynamic VLAN is enabled, the associated VLAN is actively changed based on the property (Tunnel-
Private-Group-ID) specified by the RADIUS server.
[Note]
This command can be specified only for LAN/SFP port.
Changing the settings for this command will make the authentication state return to the default.
To use this command, you must enable the port authentication function for the applicable interface. (dot1x port-control
command, auth-mac enable command)
This command cannot be set when Web authentication is enabled.
[Example]
Enable dynamic VLAN on LAN port #1.
SWR2311P(config)#interface port1.1
SWR2311P(config-if)#auth dynamic-vlan-creation

5.3.13 Set the guest VLAN

[Syntax]
auth guest-vlan vlan-id
no auth guest-vlan
[Parameter]
vlan-id
[Initial value]
no auth guest-vlan
[Input mode]
interface mode
[Description]
If the supplicant connected to the applicable interface is unauthorized or if authorization has failed, this specifies the guest
VLAN to which the supplicant is associated.
If this command is executed with the "no" syntax, the guest VLAN setting is deleted.
[Note]
This command can be specified only for LAN/SFP port.
Changing the settings for this command will make the authentication state return to the default.
To use this command, you must enable the port authentication function for the applicable interface. (dot1x port-control
command, auth-mac enable command)
This command cannot be set in multi-supplicant mode.
This command cannot be set when Web authentication is enabled.
: <1-4094>
VLAN ID for guest VLAN
Command Reference | Interface control | 139