Brightness Of The Led During Blockage; Led Colour In A Blocked State - ABB i-bus KNX Product Manual

11.3.3.7

Brightness of the LED during blockage

Options:
Off:
■
– The LED does not light up at blockage.
Dark:
■
– The LED lights up dark at blockage.
Bright:
■
– The LED lights up bright at blockage.
The parameter is used to specify whether or in which brightness the LED lights up when the
device is blocked.
11.3.3.8

LED colour in a blocked state

Options:
Yellow - white:
■
– The LED lights up in the specified colour during blockage.
The parameter is used to specify the colour the LED lights up in when the device is blocked.
Note
The parameter is only adjustable if the "Brightness of LED during blockage"
parameter is set on "dark" or "bright".
Product manual 2CKA001473B9482
Description of application and parameters
Off
Dark
Bright
Yellow
Orange
Red
Violet
Blue
Green
White
Application "Device settings"
│63