Safety Instructions - ABB i-bus KNX Product Manual

2.5

Safety instructions

Danger - Electric voltage!
Electric voltage! Risk of death and fire due to electric voltage of 100 ... 240 V.
Dangerous currents flow through the body when coming into direct or indirect
contact with live components. This can result in electric shock, burns or even
death.
■
■
■
■
■
■
■
Danger - Electric voltage!
Install the device only if you have the necessary electrical engineering
knowledge and experience.
■
■
The minimum necessary expert knowledge and requirements for the installation
are as follows:
■
■
■
■
Caution - Glass breakage!
The breakage of a glass plate could lead to the risk of injury.
Thr glass plate consists of high-quality safety glass. Yet breakage cannot be
excluded.
–
–
Caution! - Risk of damaging the device due to external factors!
Moisture and contamination can damage the device.
■
Product manual 2CKA001473B9482
Work on the 100 ... 240 V supply system may only be performed by
authorised and qualified electricians.
Disconnect the mains power supply before installation / disassembly.
Never use the device with damaged connecting cables.
Do not open covers firmly bolted to the housing of the device.
Use the device only in a technically faultless state.
Do not make changes to or perform repairs on the device, on its components
or its accessories.
Keep the device away from water and wet surroundings.
Incorrect installation endangers your life and that of the user of the electrical
system.
Incorrect installation can cause serious damage to property, e.g. due to fire.
Apply the "five safety rules" (DIN VDE 0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts.
Use suitable personal protective clothing.
Use only suitable tools and measuring devices.
Check the type of supply network (TN system, IT system, TT system) to
secure the following power supply conditions (classic connection to ground,
protective earthing, necessary additional measures, etc.).
Avoid force being applied to the glass plate.
Never reach into a broken glass with you bare hands.
Protect the device against humidity, dirt and damage during transport,
storage and operation.
Safety
│13