Ending The Alarm Automatically; Time For Automatic Ending Of The Alarm - ABB i-bus KNX Product Manual

11.3.1.8

Ending the alarm automatically

Options:
Deactivated:
■
– The alarm is not switched off automatically.
Activated:
■
– The alarm is switched off automatically at an adjustable time.
By activating the parameter the alarm is automatically switched off after a parameterised time.
The switch-off time is set via parameter "Time for automatic ending of the alarm".
The further differentiation is carried out via the parameter that is available after enabling.
Note
The parameter can only be set when parameter "Acoustic alarm via object" is
activated.
11.3.1.9

Time for automatic ending of the alarm

Options:
The set value defines the time for the automatic ending of the pending alarm.
The further differentiation is carried out via the parameter that is available after enabling.
Note
The parameter can only be set when parameters "Acoustic alarm via object" and
"Ending the alarm automatically" are activated.
Product manual 2CKA001473B9482
Description of application and parameters
Deactivated
Activated
Setting option from 00:00:10 to 18:00:00 (hh:mm:ss)
Application "Device settings"
│55