Light Scene Memory Function - ABB i-bus KNX Product Manual

11.5.138.15

Light scene memory function

Options:
Deactivated:
■
– Communication object "Scene storage" is not enabled.
Activated:
■
– Communication object "Scene storage" is enabled.
The 1-byte communication object "Scene storage" can be enabled with this parameter. And it is
specified whether the LED of the button flashes for three seconds and lights continuously when
a telegram for scene storage is received via the enabled object.
The LED flashes in the colour that is set for the status or function illumination. If object
"Day/night mode" is enabled, the LED flashes either bright or dark.
Note
The parameter is available via the following settings:
■
■
■
■
The parameter is available also via the following settings:
■
■
■
The parameter is available also via the following settings:
■
■
Product manual 2CKA001473B9482
Description of application and parameters
Deactivated
Activated
The parameter "Operating mode" is set on "Status illumination".
and
Parameter "Object type for status object" is set on "1 bit".
and
Parameter "Colour for Off" is set on a colour and not on "Off".
and
Parameter "Colour for On" is set on a colour and not on "Off".
The parameter is set on "Status illumination".
and
Parameter "Object type for status object" is set on "1 byte 0-100%.
and
All parameters "Colour for zone x" are set on a colour and not on "Off".
The "Operating mode" parameter is set on "Function illumination".
and
Parameter "Colour for function illumination" is set on a colour and not on
"Off".
Application "Function block RTC"
│137