Led Colour In A Blocked State; Internal Proximity Status Via Object - ABB i-bus KNX Product Manual

11.3.2.4

LED colour in a blocked state

Options:
Yellow - white:
■
– The LED lights up in the specified colour during blockage.
The parameter is used to specify the colour the LED lights up in when the device is blocked.
Note
The parameter is only adjustable if the "Brightness of LED during blockage"
parameter is set on "dark" or "bright".
11.3.2.5

Internal proximity status via object

Options:
Deactivated:
■
– The communication object is not enabled.
Activated:
■
– The communication object is enabled.
A 1-bit communication object "NARX: internal proximity status" can be enabled with this
parameter. A telegram is ent on the bus via the enabled object when the user approaches the
device.
Product manual 2CKA001473B9482
Description of application and parameters
Yellow
Orange
Red
Violet
Blue
Green
White
Deactivated
Activated
Application "Device settings"
│59