Setpoint Settings - Setpoint Temperature For Heating And Cooling Comfort (°C); Setpoint Settings - Setpoint Temperature For Heating Comfort (°C); Setpoint Settings - Reduction For Standby Heating (°C); Setpoint Settings - Reduction For Eco Heating (°C) - ABB i-bus KNX Product Manual

11.5.81 Setpoint settings — Setpoint temperature for heating and cooling comfort (°C)
Options:
Specifies the comfort temperature for heating and cooling when people are present.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating and cooling" or "heating and cooling with additional stages".
11.5.82 Setpoint settings — Setpoint temperature for heating comfort (°C)
Options:
Specifies the comfort temperature for heating when people are present.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating, "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stage" and parameter "Setpoint heating comfort =
setpoint cooling comfort" is set on "No".
11.5.83 Setpoint settings — Reduction for standby heating (°C)
Options:
Specifies the temperature in heating mode when nobody is present. On devices with a display,
this mode is indicated by the standby icon.
Note
This parameter is only available when the "Control function" parameter is set on
"Heating", "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages".
11.5.84 Setpoint settings — Reduction for ECO heating (°C)
Options:
Specifies the temperature in heating mode when nobody is present. On devices with a display,
this mode is indicated by the eco icon.
Product manual 2CKA001473B9482
Description of application and parameters
Setting option between 10 - 40
Setting option between 10 - 40
Setting option between 10 - 40
Setting option between 0 - 15
Application "Function block RTC"
│107