Temperature Reading - Inputs Of Weighted Temperature Reading; Temperature Reading - Weighting Of Internal Measurement (0 To 100%); Temperature Reading - Weighting Of External Measurement (0 To 100%) - ABB i-bus KNX Product Manual

11.5.104 Temperature reading — Inputs of weighted temperature reading
Options:
Specifies the temperature reading inputs for the weighted measurement, in which the calculated
weighted average of the inputs is used as an input value for control
Note
This parameter is only available when the "Inputs of temperature reading"
parameter is set on "Weighted measurement".
11.5.105 Temperature reading — Weighting of internal measurement (0 to 100%)
Options:
Specifying the weighting of the internal measurement from 0 to 100%.
Note
This parameter is only available when the "Inputs of weighted temperature
reading" parameter is set on "Internal and external measurement" or "Internal
and 2x external measurement".
11.5.106 Temperature reading — Weighting of external measurement (0 to 100%)
Options:
Specifying the weighting of the external measurement from 0 to 100%.
Note
This parameter is only available when the "Inputs of weighted temperature
reading" parameter is set on "Internal and external measurement", "2x external
measurement" or "Internal and 2x external measurement".
Product manual 2CKA001473B9482
Description of application and parameters
Internal and external measurement
2 x external measurement
Internal and 2x external measurement
Setting option between 0 - 100
Setting option between 0 - 100
Application "Function block RTC"
│114