Application - Cyclic Telegrams; Channel Name - ABB i-bus KNX Product Manual

11.6.2

Application - Cyclic telegrams

The application can be used to send telegrams cyclic on the bus under fixed conditions.
The following communication objects are available:
"GFx: input"
■
"GFx: output"
■
"GFx: enable" (1-bit object)
■
The objects "GFx: input" and "GFx: output" can take on different sizes (1 bit - 4 byte, depending
on the object type selected). The bit sizes of objects "GFx: input" and "GFx: output" can be
collectively adjusted for the different applications.
After the receipt of a telegram on object "GFx: input", a telegram with the same content is sent
cyclic via the application on the bus via object "GFx: output". The object types for "GFx: input"
and "GFx: output" can be collectively parameterised for the different applications. The times for
cyclic sending via "GFx: output" object are adjustable.
An additional "GFx: enable" object provides the option of temporarily blocking the function.
Note
The parameters for application "Cyclic telegrams" can be called up via general
parameters and extended parameters .
Note
The number of the object (GF1 - GFx) depends on the channel used.
11.6.2.1

Channel name

Entry:
The parameter can be used to name the selected channel. The preset name "Channel" can be
replaced with any arbitrary name. The length of the name is limited to 30 characters.
Product manual 2CKA001473B9482
Description of application and parameters
<Name>
Application "General functions"
│141