Switchover Time Via Object; Overwrite Switchover Time At Download - ABB i-bus KNX Product Manual
Room temperature controller
Hide thumbs
Also See for i-bus KNX:
- Product manual (264 pages) ,
- Product manual (252 pages) ,
- Product manual (45 pages)
Table of Contents
Advertisement
11.3.3.5
Switchover time via object
Options:
Deactivated:
■
–
The communication object is not enabled.
Activated:
■
–
The communication object is enabled.
A 2-byte communication object "EF: automatic switchover time" can be enabled with this
parameter. The time can then be adjusted via the KNX bus.
Note
This parameter can only be adjusted when the "Use of automatic
enable/blockage" parameter is set on "Automatic enable" or "Automatic
blockage".
11.3.3.6
Overwrite switchover time at download
Options:
Deactivated:
■
–
The switchover time is not overwritten during a download of the application.
Activated:
■
–
The switchover time is overwritten during a download of the application.
The parameter can be used to specify whether the data changed via communication object "EF:
automatic switchover time" are to be overwritten during the download or the times should be
retained.
Note
This parameter can only be adjusted when the "Use of automatic
enable/blockage" parameter is set on "Automatic enable" or "Automatic
blockage".
Product manual 2CKA001473B9482
Description of application and parameters
Deactivated
Activated
Deactivated
Activated
Application "Device settings"
│62
Advertisement
Table of Contents
