Initial Configuration Procedure - Huawei 3900 Series Solution Manual

Hide thumbs Also See for 3900 Series:

Table of Contents

3900 Series Base Station GU Co-Cabinet

Solution Guide

Configuration of the License

The licenses should be configured separately according to the GSM and UMTS service

capabilities.

Configuration of the RF Modules

The RF modules are separately configured for the GBTS and NodeB.

The RF module configuration for the GBTS part of the GU co-cabinet base station is the same

as that for the GSM-only base station.

The RF module configuration for the NodeB part of the GU co-cabinet base station is the same

as that for the UMTS-only base station.

The dry contact alarms of the RF modules and those of the monitoring devices connected to the

RF module should be separately configured for and monitored by the GBTS and the NodeB.

5.3 Initial Configuration Procedure

This describes the initial configuration for the 3900 series GU co-cabinet base stations. The

initial configuration procedure for the GBTS part of the GU co-cabinet base station is the same

as that for the GSM-only base station. For details, see the BSC6000 Initial Configuration

Guide. The initial configuration procedure for the NodeB part of the GU co-cabinet base station

is the same as that for the UMTS-only base station. For details, see the NodeB Initial

Configuration Guide.

Issue 04 (2009-07-30)

Huawei Proprietary and Confidential

5 Initial Configuration

5-3

Table of Contents