Suzuki Grand Vitara XL-7 Service Manual page 546

9) Using 2 large screwdrivers (4) as levers, pull out right side drive
shaft joint (1) from differential (2) and dismount housing assem-
bly from vehicle.
CAUTION:
During above work, use care not to cause damage to
drive shaft boot.
3. Transmission jack
REMOUNTING
For remounting, reverse dismounting procedure and use following
tightening torque.
Tightening torque
Propeller shaft flange bolts (a):
.
50 N
Front drive shaft flange bolts (b):
.
50 N
Front mounting bracket bolts (c):
.
50 N
Rear mounting bracket bolts (d):
.
60 N
Rear mounting bolt (e):
.
85 N
Rear mounting bracket No.2 bolts (f):
.
85 N
After tightening all fasteners properly, fill hypoid gear oil as speci-
fied and check tightening of plugs with specification.
m (5.0 kg-m, 36.5 lb-ft)
m (5.0 kg-m, 36.5 lb-ft)
m (5.0 kg-m, 36.5 lb-ft)
m (6.0 kg-m, 43.5 lb-ft)
m (8.5 kg-m, 61.5 lb-ft)
m (8.5 kg-m, 61.5 lb-ft)
DIFFERENTIAL (FRONT) 7E-15