Suzuki Grand Vitara XL-7 Service Manual page 231

6) Remove intercooler air hoses.
7) Remove cylinder head cover referring to "CYLINDER HEAD
COVER" in this section.
8) Disconnect vacuum hoses from throttle valve assembly, EGR
valve and waste gate actuator.
9) Remove bracket (1) from water outlet box.
10) Remove fuel temperature sensor (2).
11) Disconnect oil cooler inlet water hose (3), oil cooler outlet water
hose (4), radiator outlet hose No.1 (5) and inlet fuel hoses (6)
from water outlet box.
12) Remove oil level gauge upper guide bolt.
13) Disconnect fuel pressure sensor connector, ECT sensor con-
nector and glow plug supply wire at the connector.
14) Remove high pressure supply pipe (1).
When loosening union nut of high pressure supply pipe, hold
union nut of injection pump with wrench.
Special Tool
(A): 09950-76510/OUT0000148
15) Detach water inlet box (1) from cylinder block.
16) Disconnect oil return pipe (1) and lubrication pipe (2) from
turbocharger.
17) Remove turbocharger bracket bolt (3).
ENGINE MECHANICAL (RHZ ENGINE) 6A3-33