Suzuki Grand Vitara XL-7 Service Manual page 244

6A3-46 ENGINE MECHANICAL (RHZ ENGINE)
6) Install oil partition (2) and oil level gauge lower guide (1).
7) Reverse removal procedure for installation, as previously out-
lined.
8) Adjust generator belt tension, referring to Section 6H.
9) Adjust A/C compressor belt tension, if equipped. Refer to Sec-
tion 1B.
10) Check to ensure that all removed parts are back in place. Rein-
stall any necessary parts which have not been reinstalled.
11) Refill engine with engine oil, referring to "ENGINE OIL
CHANGE" in Section 0B.
12) Refill cooling system referring to "ENGINE COOLING" section.
13) Refill front differential housing with gear oil, referring to Section
7E of the Service Manual mentioned in this manual.
14) Connect negative cable at battery.
15) Check to make sure that there is no fuel leakage, coolant leak-
age, oil leakage and exhaust gas leakage at each connection.