Glow Plug - Suzuki Grand Vitara XL-7 Service Manual

Hide thumbs Also See for Grand Vitara XL-7:

Table of Contents

ENGINE AND EMISSION CONTROL SYSTEM (RHZ ENGINE) 6E3-19

GLOW PLUG

D Do not damage heating section of the glow plug.

D Do not use glow plug that has been dropped from height

of over 10 cm (4 in.).

D When removing glow plug, first loosen it by using a tool

so that one or more screw threads remain engaged, then

loosen and remove by hand.

1) Disconnect negative cable at battery.

2) Remove intercooler and intercooler bracket (1).

3) Disconnect each coupler and install wire harness protector (2).

4) Remove bracket (3) with fuel heater.

5) Disconnect glow plug cable (1) from glow plug (2).

6) Remove glow plug from cylinder head.

INSTALLATION

For installation, reverse removal procedure noting the following.

D Tighten glow plug to specified torque.

Tightening Torque

Glow plug (a): 10 N

m (1.0 kg-m, 7.5 lb-ft)

Table of Contents

Do you have a question about the Grand Vitara XL-7 and is the answer not in the manual?

February 17, 2025

Where is the keyway on the crankshaft be located when the motor is at top dead center Suzuki grand Vitara 2.7L