Suzuki Grand Vitara XL-7 Service Manual page 210

6A3-12 ENGINE MECHANICAL (RHZ ENGINE)
12) Loosen camshaft timing belt pulley bolts (1).
NOTE:
Do not remove camshaft timing belt pulley bolts (1).
13) Fit special tool as shown.
Special Tool
(A): 09919-56560/OUT0000138
14) Turn timing belt tensioner counterclockwise using special tool
(B) until special tool (A) indicates 54 ± 2. Then tighten timing
belt tensioner bolt to specified torque.
Special Tool
(B): 09919-56550/OUT0000141
Tightening Torque
Timing belt tensioner bolt (a):
.
25 N m (2.5 kg-m, 18.0 lb-ft)
15) Tighten camshaft timing belt pulley bolts to specified torque.
Tightening Torque
Camshaft timing belt pulley bolt (b):
.
20 N m (2.0 kg-m, 14.5 lb-ft)
16) Remove special tool (A) and then install it again.
17) Check that special tool (A) indicates between 51 and 57. If in-
dication of tool is out of specified value, perform step 4) to 14)
again after loosening timing belt.
18) Remove special tools.
19) Install timing belt covers.
20) Install fuel filter assembly and connect fuel hoses securely.