7E-12 DIFFERENTIAL (FRONT)
4
1
3
2
1. Mounting bracket L
2. Bush
REMOVAL AND INSTALLATION
DIFFERENTIAL MOUNTINGS
1) Lift up vehicle and turn steering wheel all way to the right.
2) Separate front mounting bracket R (2) from differential housing
3) Remove mounting bracket R (2) by removing mounting front bolt
4) Remove mounting bracket L (3) from differential housing (1) by
2
5) Check conditions of each bush. If it is damaged or deteriorated,
6) Position slit in each bush as shown when press-fitting it.
3. Mounting bracket R
A: Slit alignment 45_
(3) by removing bolts (1) from its lower part.
(4) from its upper part.
removing upper and lower fastening bolts (2, 4).
drive it out with special tools and press for replacement.
Special Tool
(A): 09951-26010
(B): 09951-16080