Suzuki Grand Vitara XL-7 Service Manual page 395

14) Assemble reverse brake ring (1), springs (2), keys (3), 5th gear
synchronizer outer ring (4), 5th gear synchronizer cone ring (5)
and 5th gear synchronizer pull ring (6) according to the follow-
ing procedure.
a) Install springs (1) and keys (2) to reverse brake ring (3) as
shown in the figure.
b) Install 5th gear synchronizer outer ring to reverse break
ring, fitting key of the reverse break ring (1) into groove of
5th gear synchronizer outer ring (2) as the figure shows.
c) Install 5th gear synchronizer cone ring to 5th gear synchro-
nizer outer ring, setting groove of 5th gear synchronizer out-
er ring (1) and groove of 5th gear synchronizer cone ring (2)
in the same position.
d) Install 5th gear synchronizer pull ring (2) to 5th gear syn-
chronizer outer ring and cone ring assembly, fitting protru-
sion of 5th gear synchronizer pull ring (2) into groove of 5th
gear synchronizer cone ring (1) as shown in the figure.
MANUAL TRANSMISSION 7A2-47