Suzuki Grand Vitara XL-7 Service Manual page 498

Hide thumbs Also See for Grand Vitara XL-7:

Table of Contents

Direct Clutch Piston Return Spring

D Measure free length.

Standard free length of direct clutch piston return spring:

15.13 mm (0.595 in.)

Direct Clutch Piston

D Shake piston to check that ball is not stuck.

D Apply air pressure and check that there is no leakage.

Assemble each component by reversing disassembly procedure

and noting the following points.

D Always use new O-ring and apply A/T fluid before installation.

D Do not align opening in retaining ring (2) with lug of direct clutch

piston return spring at retainer.

Special tool

(A): 09926-98310

D Use care so that direct clutch piston return spring will not fall or

Be careful when applying pressure, for overpressure will

cause plate section of piston return spring to deform.

D Do not match opening (1) in retaining back plate ring with cutout

(2) in direct clutch cylinder.

D Install clutch backing plate with its grooved side facing the front.

AUTOMATIC TRANSMISSION (4 A / T) 7B1-93

Chapters

Table of Contents