Table of Contents
Advertisement
A-52
A-52
General Description
This feature provides the ATTENDANT CONSOLE [A-3] with the capability to enter an Account Code into
the system after talking with a CO outgoing/incoming call.
Operating Procedure
The Attendant talks with the CO trunk call.
1.
Press the START key.
2.
Dial the Account Code feature access code. Service Set Tone is heard.
3.
Dial the Account Code (up to 10 digits).
4.
Dial the desired station number.
Service Conditions
1.
The Account Code may be a maximum of 10 digits.
2.
When the Account Code is entered again for the same call and station, the last code entered will
be recorded on SMDR [S-10, 47].
3.
Account Code dialing is available for an ATTENDANT CONSOLE [A-3] connected to a trunk.
4.
The feature access code for Account Code will be a maximum of 3 digits.
5.
An Attendant can enter an Account Code of fewer digits than the maximum length defined,
indicating the end of entry by the pound "#" key.
Page 36
Account Code - Attendant
Account Code - Attendant
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
