Table of Contents
Advertisement
M-15
General Description
The NEAX2400 ICS can provide a hard copy of maintenance and system management data via the
MAINTENANCE ADMINISTRATION TERMINAL (MAT) [M-18] printer.
Operating Procedure
Refer to NEAX2400 ICS Command Manual.
Service Conditions
The following hard copy reports can be obtained:
1.
History printout for command execution: When the command is executed, the following
information will be printed
•
Office Name
•
Command Name
•
Date and time of execution of the specific command.
•
Parameter date and other information typed in by MAT [M-18] operator.
•
Date and time of command completion.
2.
System Message printout: The system message will be printed automatically, and/or when the
command is executed.
3.
Traffic and Peg count printout: The traffic and peg count will be printed automatically by request
from the MAT [M-18].
4.
Office Data printout: The office data lists can be printed to include station number list, trunk data
list, and access code data list.
Interactions
1.
All other printouts are automatically printed in conjunction with the operation of the MAT or in
requesting Traffic Data. See MAINTENANCE ADMINISTRATION TERMINAL [M-18].
2.
The MAINTENANCE PRINTOUT as described will be assigned to Port 1. For Model 160, other
ports may be used. However, using an alternate port will require additional cabling.
3.
If Port 1 is used for MAINTENANCE PRINTOUT, another port must be used for REMOTE
MAINTENANCE [R-7].
4.
For Automatic MAINTENANCE PRINTOUT via the MAT, assign the MAT port in System Data 1,
Index 116 as data 42H. Assign the destination of System Messages in Index 39 as Port 0. Index
86, Bits 4 & 7 assigned as data "1".
5.
Indexes 116 - 123, which were used for IOC port attribute data assignment, are assigned in the
AIOC command.
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Maintenance Printout
Maintenance Printout
M-15
Page 317
Advertisement
Table of Contents
