Table of Contents
Advertisement
R-2
Service Conditions (cont'd)
7.
When a call terminates to the called station, the following services are available.
CALL FORWARDING - ALL CALLS
CALL FORWARDING - BUSY LINE
UCD
Call Waiting
8.
(Series 6100 software enhancement) In case of tandem connection, the originating trunk is
released automatically when the called trunk does not answer for a period of time preassigned
by system data, and the user receives Reorder Tone.
9.
The second announcement is not provided for the ISDN trunk.
10. Since the period of time to be provided announcement is 30 seconds at the maximum, the
message should be recorded within 30 seconds.
Interactions
1.
The Authorization Code used in conjunction with REMOTE ACCESS TO SYSTEM will not be
recorded in SMDR. System Data 2, Index 3, bit 5 is the only difference between Forced Account
Code and Authorization code. This Bit determines where the dialed code will appear in SMDR.
When assigned as Authorization code, those digits will not appear in SMDR.
2.
The additional step of the ARAC command, for DID trunks does not eliminate the need for
Forced Account Code assignments. In addition, Remote Access to System [R-2] via DID
requires the use of Forced Account Codes [F-7].
3.
The PBX recognizes a momentary pressing of the switchhook as a disconnect by the remote
party. Therefore, all features activated via a Connection Index of Hooking (H) are not available
to the REMOTE ACCESS TO SYSTEM feature user. A remote access user may participate in a
feature that requires a switchhook flash generated by an internal station.
4.
STATION MESSAGE DETAIL RECORDING [S-10]-REMOTE ACCESS TO SYSTEM outgoing
calls are recorded in SMDR. The field in the SMDR report that lists the calling station will list the
route and trunk number.
5.
SPEED CALLING SYSTEM [S-3] and SPEED CALLING-STATION/INDIVIDUAL [S-21, 23] may
not be accessed via REMOTE MAINTENANCE [R-7].
6.
If the REMOTE ACCESS TO SYSTEM feature is used to call stations internal to the system,
allow in ARSC the Incoming Remote Access route to the RSCs of the station that may be called.
7.
See AUTHORIZATION CODES
Page 430
Remote Access to System
[A-20]
for Check/Sum method assignments.
[C-5]
[C-2]
[U-1]
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
