Table of Contents
Advertisement
C-5
Service Conditions (cont'd)
8.
If the station's own station number is set for CALL FORWARDING - ALL CALLS, this feature is
changed to CALLING PARTY RECOGNITION SERVICE (CALL FORWARDING - ALL CALLS)
[C-103].
9.
When the station user setting CALL FORWARDING - ALL CALLS goes off-hook, Special Dial
Tone can be provided instead of Dial Tone. (Activation of this service is determined by system
data.)
10. When a destination of CALL FORWARDING - ALL CALLS has already been assigned, even if
the feature is restricted by the new office data or changing of Day/Night mode, the assigned data
can still be used or cancelled.
Interactions
1.
Station users are unaccustomed to hearing Ringback Tone when responding to their own
station's ring. Inform users when providing Ringback Tone with CALL FORWARDING-ALL
CALLS in System Data 1, Index 69, Bit 1.
2.
Call Forwarding can only be activated from an idle station.
3.
When CALL WAITING [C-12, 31], ATTENDANT CAMP-ON [A-1], and CALL BACK [C-1]are
directed toward Station A, with CALL FORWARDING set to Station B, Station B will receive Call
Waiting Tone.
4.
When a station in a STATION HUNTING [S-7, 8, 9] Group initiates CALL FORWARDING-ALL
CALLS, calls normally destined for this station will not be received. The Hunt Group operates as
if the station were busy.
5.
A noncontrolling UCD station is allowed to activate CALL FORWARDING-ALL CALLS. With this
station call forwarded, only calls that are directly dialed to this station are call forwarded. The
member station is removed from the UCD group under the conditions of this call forwarding
feature.
6.
If an Attendant attempts BUSY VERIFICATION [B-3] to Station A, which has CALL
FORWARDING-ALL CALLS set to Station B, BUSY VERIFICATION [B-3] proceeds as if the
Attendant had attempted to Verify Station B. If Station A has set CALL FORWARDING-ALL
CALLS to the Attendant Console, BUSY VERIFICATION [B-3] is allowed at Station A if Station
A were busy.
7.
When CALL FORWARDING-ALL CALLS is in effect, the activating station may be used to
originate calls. See System Data 2, Index 6, Bit 4.
8.
When a station is call forwarded, the destination station is recorded for STATION MESSAGE
DETAIL RECORDING [S-10].
9.
CALL FORWARDING-ALL CALLS can be overridden, allowing Station B to initiate or transfer
calls back to Station A.
10. STATION-TO-STATION CALLING [S-11] must first be provided.
Page 106
Call Forwarding - All Calls
NEAX2400 ICS Business Features and Specifications
NDA-24143, Issue 4
Advertisement
Table of Contents
